Apply Warning Decals - Centsys D5-Evo Installation Manual

13. Note the orientation of the origin marker.
14. Manually slide the gate open until the
origin marker is in line with the origin
sensor.
15. Ensure distance between face of marker
and front face of sensor is between 13
and 20mm.
16. Adjust distance by sliding the origin
marker along the slotted mounting holes
until the specified distance is achieved.
For best results, keep gap between
marker and sensor as small as
possible.
Apply warning decal
Apply the supplied
warning decals to the
gate as indicated on the
reverse side of the
decal.
page 27