Table of Contents
Advertisement
Delete remote button
The operation of a button of a particular transmitter can be cleared For
example, it allows the Holiday Lockout function set on one remote button
of a transmitter to be cleared, without affecting the other operations that the
same transmitter performs. The transmitter is required for this operation
Delete remote by button
Use this procedure to remove the transmitter from the system. All button
functionality will be removed. The transmitter is required for this operation.
Delete-Not-Present
Allows for transmitters that have not been used within a selectable time
period to be removed from the system. The time period can be set from one
hour to seven days, in one hour increments.
Delete all remotes
Clears the entire memory. All transmitters will be removed.
Edit remote button
Change the function of one button to perform another function. For example,
button one's function is to open the gate completely. To change this, use the
edit remote button, select Ped, and button one of the same remote will now
only open the gate to pedestrian.
Autolearn
Allows a selectable time period to be set, during which any specific button,
when pressed, will be learned to a specific function. The function itself will also
be activated when the button is pressed. After the time period has expired
autolearn is disabled, and no further buttons will be learned. The time period
can be set from one hour to seven days in one hour increments.
Tx menu locked
Allows the remote controls menu to be locked, preventing the unauthorized
addition of new transmitters to the system. Once enabled, the remote
controls menu can only be accessed by pressing a valid transmitter button.
Onboard receiver
The onboard CENTSYS code-hopping receiver can be disabled in the unlikely
event that it causes interference with an existing external receiver.
page 50
Hide quick links:
Advertisement
Table of Contents
