Table of Contents
Advertisement
Mount the rack
The rack must be securely
mounted to the side of the gate. It
must be parallel with the gate rail,
and there must be a 2 - 3mm gap
between the teeth of the pinion
Follow this procedure whether mounting steel, RAZ or nylon angle rack
Refer to the sections that follow for specifics about the mounting of each type
of rack
1. Before mounting the rack, raise the
operator an additional 3mm.
2. Put gearbox into manual mode. Refer to
Section 26 for complete instructions.
Gate rail
page 21
Rack
parallel
to rail
3mm
tooth
gap
FIGURE 18
3mm
RAISE
FIGURE 19
Thumbwheel
FIGURE 20
Hide quick links:
Advertisement
Table of Contents
