Paper Carrying Frame Removal; Paper Carrying Roller (Upper) Removal; Paper Carrying Clutch Removal; Ohp Detection Sensor (Lower) Removal - Lexmark C910 Service Manual

Hide thumbs Also See for C910:

Table of Contents

Paper Carrying Frame Removal

1. Open the top unit and remove the upper cassette, front cover,

turn guide, multipurpose feeder, right side cover, turn guide,

OHP detection sensor (upper), multipurpose feeder frame, back

cover, RIP cover, RIP board, RIP box, and electronic box.

2. Remove the four screws from the paper carrying frame.

3. Remove the screw from the OHP sensor (lower).

4. Remove the paper carrying roller (upper).

5. Remove the paper carrying clutch.

Note: When installing, the clip of the paper carrying clutch should

be securely set to the stop, and the shaft of the paper carrying clutch

and spring should be securely in contact with each other.

Service Manual