Lexmark C910 Service Manual page 68

5055-01X
Check Area F
1. Pull the high capacity feeder away from the printer.
2. Open the jam access door on the top optional drawer.
3. Remove any jams.
4. Close the jam access door.
5. Slide the high capacity feeder until the feeder locks to the
docking frame. When the feeder is in the correct position, you
hear a click.
6. Press Go.
Note: If the paper jam message continues, check and clear all
paper from the paper path.
250 Paper Jam Check MP Feeder
1. Slowly pull the jam straight out of the multipurpose feeder. If the
paper will not come out, continue.
2. Open the top cover.
3. Remove the paper on the transfer belt.
4. Close the top cover.
5. Press Go.
24<x> Paper Jam Check Tray <x>
Jams in five areas result in a 24<x> Paper Jam message, where x
represents the tray number where the jam has occurred. Paper jam
messages 241–244 indicate a jam has occurred in one of the trays.
241-244 Paper Jam
1. Pull out the tray indicated on the display.
2. Remove any wrinkled or creased paper.
3. Push down on the remaining paper in the tray until the bottom
plate clicks into place.
4. Close the tray.
5. Press Go.
Note: If the paper jam message continues, check and clear all
paper from the paper path.
1-52
Service Manual