Lexmark C910 Service Manual page 69

5055-01X
249 Paper Jam Check Tray <x>
A 249 Paper Jam Check Tray <x> message indicates a jam has
occurred in the high capacity feeder.
1. Open the top cover.
2. Remove the jam.
3. Close the top cover.
4. Press Go.
200 Paper Jam (Check Areas G, H, I)
A 200 Paper Jam indicates a jam has occurred in the finisher.
1. Open the finisher top cover and remove any jams.
2. Push the finisher to printer latch and hold it in.
3. Roll the finisher away from the printer.
4. Release the latch.
5. Remove any jams from the finisher entry guide.
6. Lift the finisher entry guide handle.
7. Lift the dust box, rotate the bottom outward, and remove it.
8. Release the finisher entry guide handle.
9. Lift the jam access cover.
10. Rotate the green knob to move the paper into the access cover
area then remove the paper.
11. Lift the finisher entry guide handle.
12. Place the top of the dust box in the finisher, and rotate the
bottom of the dust box into the finisher.
13. Release the finisher entry guide.
14. Open the stapler door.
15. Remove any jams from the accumulator. You can rotate the
accumulator knob counterclockwise to move the paper down.
16. Close the stapler door.
17. Roll the finisher toward the printer until the finisher locks into
place.
18. Make sure the finisher is properly aligned with the printer.
General Information
1-53