Lexmark C910 Service Manual page 161

5055-01X
Message
Ready Hex
Remove Paper
<specified bin>
Resetting Maint
Cnt Value
Resetting the
Printer
Restore Held
Jobs. Go/Stop?
Restoring
Factory
Defaults
Restoring Held
Jobs
Serial <x>
Std Bin Full
Supplies
Meaning
The printer is in Hex Trace
mode and is ready to receive
and process print jobs
The specified output bin is
full.
The printer is resetting the
counter that tracks wear on
the fuser.
The printer is resetting to the
current default settings. Any
active print jobs are canceled.
The printer has been reset or
has been turned on and the
printer detects print and hold
jobs stored on the hard disk.
The printer is restoring factory
default settings.
The printer is restoring held
jobs from the hard disk.
A serial interface is the active
communication link.
The standard bin is full.
One of the printer supplies
requires attention.
Action
• Send a job to print. All
data is printed in
hexadecimal. Control
strings are printed, not
executed.
• Turn the printer off and
then on to exit Hex Trace
mode.
Remove the paper from
the specified bin(s).
Wait for the message to
clear.
Wait for the message to
clear.
Press Go. All jobs on hard
disk are restored.
Press Return or Stop. No
jobs are restored and the
printer returns to Ready.
Wait for the message to
clear.
Wait for the message to
clear.
Wait for the message to
clear.
Remove the paper in the
bin to clear the message.
Press Menu to open the
Supplies Menu and identify
which supply item needs
replacing.
Diagnostic Information
2-45