Operating Clearances - Lexmark C910 Service Manual

5055-01X
Electrical Specifications
110 Volt Model
•
120 to 127 VAC at 50 to 60 hertz (hz) nominal
110 Volt Model with High-Capacity Feeder or Finisher
•
120 to 240 VAC at 50 to 60 hertz (hz) nominal

Operating Clearances

•
Left side:
•
Right side:
– C910(n)
– C910dn
•
Front:
•
Rear:
•
Top:****
– 91029 in. (736.6 mm)
– C910n(dn)34.3 in. (871.2 mm)
Note: * Clearance on left side should be 9 in. (228.6 mm) with the
finisher attached.
** Clearance on right side should be 30 in. (762 mm) with the high-
capacity feeder attached.
*** Clearance on the right side should be 13 in. (330 mm) with the
duplex attached, but not the high-capacity feeder.
**** With the high-capacity feeder or finisher attached, the top
clearance needs to be 43.8 in. (1,113 mm).
1-26
Service Manual
13 in. (330 mm)*
6 in. (152 mm)**, ***
13 in. (330 mm)**, ***
26 in. (660 mm)
5 in. (127 mm)