5055-01X
Photodeveloper Missing Service Check
When you replace the photodeveloper unit, all three color units must
be replaced at the same time.
FRU
1
Photodeveloper
2
Sub-frame Unit
3
High Voltage
Unit
4
Printer
Controller
Board
Check for dirt or damage to the sensing contacts on
rear. Clean or replace the photodeveloper drum unit
if necessary.
Check the sensing contacts on the sub-frame
assembly. Clean or replace the affected contacts or
sub-frame.
If the problem remains, replace the high voltage unit
(HVU).
If the problem remains, replace the printer controller
board.
Action
Diagnostic Information
2-85