Internet Access Configuration - Symmetricom GoWide 4.6 User Manual

S S S S S S S S S

Internet Access Configuration

Note:
captures. For Windows 95/NT 4.0/2000/XP, please refer to the appropriate user
manual.
To configure a PC to access the Internet, do the following:
1. Ensure that there is still a TCP/IP connection to the GoWide 4.6. If not, refer to the
PC Configuration section.
2. Using the TCP/IP Properties page, check that the installed Gateway IP address
has not changed. See Figure 51.
Note:
4.6 LAN port IP address.
Figure 51. Installed Gateway IP Address
3. Click the IP Address tab and select Obtain an IP address automatically. See
Figure 52.
GoWide 4.6 G.shdsl Bridge/Router – User Manual
Router Mode Configuration
097-91022-01 Issue 1: February 2002
S S S S S S S S S
The figures illustrating Internet access configuration are Windows 98 screen
In Router mode, the Gateway IP address of the PC is the same as the GoWide
S S S S S S S S S S S S S S S S S S
2
3
5
S S S S
1
4
4
83