Gowide 4.6 Configuration; Gowide 4.6 Login - Symmetricom GoWide 4.6 User Manual

S S S S S S S

GoWide 4.6 Configuration

GoWide 4.6 Login

Procedure I. GoWide 4.6 Login
Step
1
Power up the computer (if not already powered up). Open the Internet Explorer Web browser.
Note: Ensure that both the Automatically detect settings box and the Use a proxy server for your LAN
(These settings will not apply to dial-up or VPN connections) box are not selected. See Figure 32.
2
Enter 10.0.0.1 for the IP address in the Address field.
3
The GoWide initial screen (Figure 33) is now displayed. Click Login.
4
Enter the password in the Password window (default is password). To change the password, refer to the
Change Password section in Chapter 2.
5
Press Enter. The GoWide device status screen (Figure 34) is now displayed.
Figure 32. Web Browser LAN Settings
4
56
S S S S S S S S S
Procedure I describes the method for logging in to the GoWide 4.6.
S S S S S S S S S
Procedure
End of Procedure
S S S S S S S S S
GoWide 4.6 G.shdsl Bridge/Router – User Manual
Router Mode Configuration
097-91022-01 Issue 1: February 2002
S S S S S S