Lan Port Configuration - Symmetricom GoWide 4.6 User Manual

S S S S S S S

LAN Port Configuration

Procedure D. Configuring LAN Ports
Step
1 Select the Ethernet hyperlink in the System Menu (Figure 14).
2 Enter the values for Local IP and Subnet Mask in the respective fields (Figure 15).
3 Click the Apply button if all data is correct.
3
32
S S S S S S S S S
Clicking the Bridge hyperlink brings up the Configure LAN Port screen (Figure 14).
Procedure D describes the method for configuring the LAN Port.
S S S S S S S S S
Procedure
End of Procedure
S S S S S S S S S
GoWide 4.6 G.shdsl Bridge/Router – User Manual
Bridge Mode Configuration
097-91022-01 Issue 1: February 2002
S S S S S S