Wan Port Configuration Using Pppoe Relay - Symmetricom GoWide 4.6 User Manual

S S S S S S S S S

WAN Port Configuration using PPPoE Relay

Refer to Procedure f for information on configuring the WAN Port using PPPoE
Relay.
Procedure F. Configuring WAN Port Using PPPoE Relay
Step
1 Select PPPoE Relay in the System Menu (Figure 18).
2 Enter the VPI value in the VPI field.
3 Enter the VCI value in the VCI field.
4 Select the Quality of Service type: UBR (default setting), CBR, or VBR. A pop-up screen appears. Enter the
appropriate information.
5 Select the Encapsulation type: LLC, VCMUX, or Learning (default setting).
6 Select the HDLC Header type: Enable, Disable, or Learning (default setting).
7 Click the Apply button if all data is correct.
GoWide 4.6 G.shdsl Bridge/Router – User Manual
Bridge Mode Configuration
097-91022-01 Issue 1: February 2002
S S S S S S S S S
End of Procedure
S S S S S S S S S
Procedure
S S S S S S S S S
2
3
5
S S S S
3
39