Contents - Symmetricom GoWide 4.6 User Manual

FCC Regulatory Notice
According to Federal Communications Commission (FCC) Rules regarding radio frequency
emissions, the GoWide complies with FCC Part 15 for Class B computing devices. The following
paragraph is required by the FCC.
This equipment generates, uses and can radiate radio frequency energy and if not used in
accordance with the instruction manual, may cause interference to radio communications. It has
been tested and found to comply with the limits for a Class B computing device pursuant to Subpart
J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such
interference when operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference, in which case the user, at his own expense, will be
required to take whatever measures may be necessary to correct the interference.
If this equipment does cause harmful interference to radio or television reception, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Note:
void the user's authority to operate the equipment.
Canadian D.O.C.
This product conforms with Canadian Class A Emissions Regulations.
Approvals
Safety: FCC Part 68, EN60950, UL 1950, C/UL to CSA 22.2 No.950, TUV, IC CS03
Emissions: FCC Part 15 Class B, EN55022/CISPR22 Class B
Immunity: EN55024
Warning:
GoWide 4.6 G.shdsl Bridge/Router – User Manual

Contents

097-91022-01 Issue 1: February 2002
Turn the equipment "OFF" and "ON".
Re-orient or relocate the receiving antenna.
Increase distance between equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
Any changes or modifications not expressly approved by the grantee of this device could
Use a minimum of 26AWG line cord for the DSL connection.
3