Parameters From Service Provider; Worksheet - Symmetricom GoWide 4.6 User Manual

S S S S S S S S S

Parameters from Service Provider

The following parameters are an example of what may be provided by the Service
Provider (ISP) for configuring the PC or Bridge/Router.
Example shown below:
------------------------------------------------------------------------------------------------------------------------------------------------------------
PLEASE HAVE THIS INFORMATION BEFORE YOU PROCEED:
Note:
in bridge mode.
134 (End)
S S S S S S S S S
• IP Address
• Subnet Mask Address
• Gateway Address
• DNS Primary IP Address
• DNS Secondary IP Address
• Domain Address
• VCI value (default: vci=35)
• VPI value (default: vpi=0)

Worksheet

• IP Address
• Subnet Mask Address
• Gateway Address
• DNS Primary IP Address
• DNS Secondary IP Address
• Domain Address
• VCI value (default: vci=35)
• VPI value (default: vpi=0)
• Domain Name
• Host Name
If VCI/VPI values are the same as the default values, no changes are required
S S S S S S S S S
192 . 168 . 001 . 100
255 . 255 . 255 . 0
192 . 168 . 001 . 1
202 . 023 . 003 . 75
202 . 023 . 003 . 85
010 . 010 . 012 . 40
35
0
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___ . ___ . ___ . ___
___
___
__________________
__________________
GoWide 4.6 G.shdsl Bridge/Router – User Manual
S S S S S S S S S
Service Parameters and Worksheet
097-91022-01 Issue 1: February 2002
S S S S