Wan Port Configuration Using Rfc1483 - Symmetricom GoWide 4.6 User Manual

S S S S S S S S S

WAN Port Configuration using RFC1483

Refer to Procedure E for information on configuring the WAN Port using RFC1483.
Procedure E. Configuring WAN Port Using RFC1483
Step
1 Select RFC1483 in the System Menu (Figure 17).
2 Enter the VPI value in the VPI field.
3 Enter the VCI value in the VCI field.
4 Select the Quality of Service type: UBR (default setting), CBR, or VBR. A pop-up screen appears. Enter the
appropriate information.
5 Select the Encapsulation type: LLC (default setting) or VCMUX.
6 Click the Apply button if all data is correct.
GoWide 4.6 G.shdsl Bridge/Router – User Manual
Bridge Mode Configuration
097-91022-01 Issue 1: February 2002
S S S S S S S S S
End of Procedure
S S S S S S S S S
Procedure
S S S S S S S S S
2
3
5
S S S S
3
37