Gowide 4.6 Rear Panel - Symmetricom GoWide 4.6 User Manual

S S S S S S S S S

GoWide 4.6 Rear Panel

Figure 2 shows the GoWide 4.6 Rear Panel.
Figure 2. GoWide 4.6 Rear Panel
POWER AC
SWITCH POWER
The GoWide 4.6 rear panel connectors and switches are described in Table B.
Table B. Rear Panel Connectors and Switches
Nomenclature
POWER SWITCH
AC POWER
RESET SWITCH
ETHERNET PORTS
CONSOLE PORT
DSL PORT
GoWide 4.6 G.shdsl Bridge/Router – User Manual
Product Description
097-91022-01 Issue 1: February 2002
S S S S S S S S S
RESET
SWITCH
Allows GoWide to be turned ON or OFF.
A receptacle for the power cord.
Returns GoWide to factory settings.
Allows GoWide to establish a connection directly to a computer from any of its four
ports. An RJ-45 straight cable is provided and the modem has auto-crossing capability.
Therefore, connection to a computer or a hub can be made without changing the RJ-45
cable. Each of the four ports has two LEDs. The green LED remains on when linked to an
active Ethernet port and will blink when there is traffic. The yellow LED indicates the
speed utilized by GoWide. It will be lit when the speed is at 100 Mb/s and will be off
when the speed is 10 Mb/s.
For administrative use only.
RJ-11 port for DSL connection and requires an RJ-11 cable (provided).
S S S S S S S S S
ETHERNET
PORTS
Explanation
S S S S S S S S S
2
3
CONSOLE DSL
PORT PORT
5
S S S S
1
15