Oce VarioPrint 2045-65 DC Job Manual page 87

Instructions
This machine is not designed for connection to an IT power system. An IT
power system is a voltage network in which the neutral wire is not connected
to earth.
For the equipment connected via a wall socket: locate the machine close to
a wall socket that is easily accessible.
For the equipment connected via a fixed connection to the electricity grid:
the disconnect device in the fixed connection should be easily accessible.
Never connect the machine to a mains voltage deviating from the value as
defined on the power-marking label. If connection to a different mains volt-
age is required, contact your local Océ organization.
Do not use another mains connection cable than the one supplied with the
machine. When replacement of the main connection cable is required, be-
cause the cable is damaged or defect, contact your local Océ organization for
a correct replacement of the mains connection cable.
Surroundings
Instructions
Do not block the ventilation openings of the machine.
Ensure that the machine is placed on a level, horizontal surface of sufficient
strength. See the Océ VarioPrint 2045-65 DC Product safety data sheets in
this appendix for information about the weight of the equipment.
Ensure there is sufficient space around the machine. This facilitates reload-
ing materials as well as maintenance.
Do not place the machine in rooms which are too small or insufficiently ven-
tilated. See the Océ VarioPrint 2045-65 DC Product safety data sheets in this
appendix for information about the recommended room volume and ventila-
tion.
Safety information 87