Oce VarioPrint 2045-65 DC Job Manual page 46

Copying a 5.5 x 8.5'' original with the platen
Place and align the original face down on the platen.
1
Use the long-edge feed direction.
Select the 'Basic' section.
2
Select '1-sided' in the 'Original' and 'Copy' function boxes.
3
Select 'No' in the 'Staple' function box.
4
Activate the 'Paper' section.
5
Make sure that the 'Paper input' card is open.
Select 5.5 x 8.5'' in the 'Source' function box.
6
[31] Select 5 x 8
[31] Select 5.5 x 8.5''
If the trays do not contain 5.5 x 8.5'' paper, add 5.5 x 8.5'' paper to tray
Note:
1 (see 'Add paper to the paper trays' on page 66).
If the required size is not 5.5 x 8.5'', adjust the 'Enlargement or
Note:
reduction'(see 'Make an enlarged or reduced copy' on page 49).
Select the number of copies.
7
Press the start key .
8
46 Océ VarioPrint 2045-65 DC Job manual