Front Control Panel Pin Definitions; Power Led; Overheat (Oh)/Fan Fail/Pwr Fail/Uid Led - Supermicro X10SDV User Manual

Front Control Panel Pin Definitions

Power LED

The Power LED connection is located
on pins 15 and 16 of JF1. Refer to the
table on the right for pin definitions.
Overheat (OH)/Fan Fail/PWR Fail/
UID LED
Connect an LED cable to pins 7 and
8 of JF1 (Front Control Panel) to use
the Overheat/Fan Fail/Power Fail and
UID LED connections. The blue LED
on pin 7 works as the front panel UID
LED indicator. The red LED on pin 8
provides warnings of overheating, fan
failure or power failure. The red LED
takes precedence over the blue LED
by default. Refer to the table on the
right for pin definitions.
A
FP PWR LED
NIC1 Activity LED
NIC2 Activity LED
B
OH/Fan Fail/PWR Fail
(Power Fail LED on PCB 2.00) X
16 15
HDD LED
Ground
Ground
2 1
2-15
Power LED
Pin Definitions (JF1)
Pin# Definition
15 3.3V
16 PWR LED
OH/Fan Fail/PWR Fail/
Blue_UID LED
Pin Definitions (JF1)
Pin# Definition
7 Blue_UID_LED
8 OH/Fan Fail/PWR Fail
Power LED
Pin Definitions (JF1)
State Definition
Off
On
Blinking
A. PWR LED
B. Overheat/Fan Fail/PWR Fail
C. UID LED
3.3 V
3.3V Stby
3.3V Stby
3.3V Stby
C
UID LED
3.3V
Reset
Reset Button
Power Button
PWR
Chapter 2: Installation
Normal
Overheat
Fan/PWR Fail