Baxi Solo 2 60 RS Installation And Servicing Instructions page 34

34
Eco Interrupter Leads
Disconnect the leads at the overheat thermostat.
One lead is removed by unscrewing the
connection from the rear of the gas valve.
The other lead can be removed after slackening off
the thermocouple connection at the gas valve.
Reassemble in reverse order.
CAUTION: Do not overtighten.
Piezo Igniter
Withdraw and disconnect
electrode lead. Remove
Solenoid Operator
Ensure electrical supply is isolated. Disconnect the
electrical plug by removing the screw and pulling
forward.
Remove solenoid operator by unscrewing
fixing screws. Exchange solenoid for new
and reassemble.
retaining nut holding piezo
igniter to bracket.
Exchange igniter
for new and
reassemble.