Baxi Solo 2 60 RS Installation And Servicing Instructions page 17

Fitting the Wall Mounting Plate
Secure plate to wall using 63mm (2 1 / in) screws.
2
From outside building, pass air duct
through wall opening. The two tabs
should be positioned at the bottom.
Inner Duct
Air Duct
Slide air duct over inner
duct until tabs contact
wall surface.
Tab
Ensure air duct is horizontal and square to wall face.
Using sealing tape supplied make good the joint on
inside of the two ducts.
Sealing Tape
Make good with
cement mortar
between the
outside wall and
duct.
17