Tcp/Ip Configuration For Macos - Arris Xfinity TG1682 User Manual

Getting
Safety Started
Battery
Installation Installation
TCP/IP Configuration for MacOS X
Follow these steps to configure the Ethernet interface on a MacOS X operating sys-
tem.
1
2
3
4
5
6
7
8
9
10 Close the System Properties application.
Xfinity TG1682 Telephony Gateway User's Guide
Ethernet
Configuration Usage
Open System Preferences, either by choosing System Preferences from the
Apple menu or by clicking the System Preferences icon in the dock.
Click the Network icon.
Choose Automatic from the Location drop-down menu, and Built-in Eth-
ernet from the Show menu.
Choose the TCP/IP tab, if necessary.
If you are using TCP/IPv4, go to step 5.
If your cable provider requires TCP/IPv6, go to step 8.
Choose Using DHCP from the Configure IPv4 menu.
If necessary, click the Renew DHCP Lease button.
Close the System Properties application.
TCP/IPv4 configuration is completed.
If you are using TCP/IPv6, click Configure IPv6 near the bottom of the pre-
vious window.
Choose Automatically from the Configure IPv6 drop-down menu and click
OK.
Troubleshooting Glossary
28