Tcp/Ip Configuration For Macos X - Arris Touchstone TG2472 User Manual

Properties
5. Click
Internet Protocol Version 4 (TCP/IPv4)
6. Select
Note: If your cable provider requires TCP/IP version 6, select
(TCP/IPv6)
The TCP/IP properties window for the version you selected displays.
7. For either TCP/IPv4 or TCP/IPv6, select
server address automatically
OK
8. Click
back out of the remaining setup screens.

TCP/IP Configuration for MacOS X

Follow these steps to configure the Ethernet interface on a MacOS X operating system.
1. Open System Preferences, either by choosing
by clicking the System Preferences icon in the dock.
2. Click the
3. Choose
menu.
4. Choose the TCP/IP tab, if necessary.
If you are using
If your cable provider requires
5. Choose
6. If necessary, click the
7. Close the System Properties application.
TCP/IPv4 configuration is completed.
8. If you are using TCP/IPv6, click
9. Choose
10. Close the System Properties application.
Release 24 STANDARD 1.1 January 2015
to open the Properties window.
Properties
and click to configure TCP/IPv6.
, unless instructed otherwise by your cable provider.
to accept the new settings and close the Properties window. Then click
Network icon.
Automatic
from the Location drop-down menu, and
TCP/IPv4 , go to step 5.
Using DHCP
from the Configure IPv4 menu.
Renew DHCP Lease
Automatically
from the Configure IPv6 drop-down menu and click
Chapter 6: Configuring Your Ethernet Connection
Properties
and click
Obtain an IP address automatically
System Preferences
TCP/IPv6 , go to step 8.
button.
Configure IPv6
near the bottom of the previous window.
Touchstone TG2472 Telephony Gateway User Guide 32
to configure TCP/IPv4.
Internet Protocol Version 6
Obtain DNS
and
from the Apple menu or
Built-in Ethernet
from the Show
OK
.
Close
to