Tcp/Ip Configuration For Windows Vista - Arris Xfinity TG1682 User Manual

Getting
Safety Started
Battery
Installation Installation
TCP/IP Configuration for Windows Vista
Follow these steps to configure the Ethernet interface on a Windows Vista operat-
ing system.
1
2
3. Click Manage Network Connections. If promted for a connection, choose
4
5
6. For either TCP/IPv4 or TCP/IPv6, select Obtain an IP address automati-
7
Xfinity TG1682 Telephony Gateway User's Guide
Ethernet
Configuration Usage
Open the Vista Control Panel.
Double-click Network and Sharing Center to display the Network and
Sharing Center window.
Local Area Connection.
The Network Connections window displays.
Double-click the Local Area Connection to open the Properties window.
Note: If Windows requests permission to continue, click Continue.
Double-click Internet Protocol Version 4 (TCP/IPv4) to configure
TCP/IPv4.
Note: If your cable provider requires TCP/IP version 6, double-click Inter-
net Protocol Version 6 (TCP/IPv6) to configure TCP/IPv6.
The TCP/IP properties window for the version you selected displays.
cally and Obtain DNS server address automatically, unless instructed
otherwise by your cable provider.
Click OK to accept the new settings and close the Properties window.
Troubleshooting Glossary
26