Getting
Safety
Started
A
B
C
D
E
F
G
H
I
J
Battery
Installation
Installation
Front Panel
The front of the Telephony Gateway has the following indicators:
A WPS button with indicator light: indicates Wireless Protected Setup (WPS)
B DECT button with indicator light: Pressing the button pages all the regis-
C
D US/DS: indicates upstream and downstream connectivity.
E
F
G 5 GHz: indicates the status of the 5GHz wireless LAN.
H Tel 1: indicates the status of telephone line 1.
I
J
Xfinity TG1682 Telephony Gateway User's Guide
Ethernet
Configuration
Usage
is active. (Button with light ring is located on top of unit.)
tered handsets. Pressing again cancels paging. Pressing and holding the but-
ton for 15 seconds places the unit in registration mode for handset
registration. (Button with light ring is located on top of unit.)
Note: The DECT button only works with CAT-iq 2.0 cordless handsets.
Power: indicates whether AC power is available to the unit.
Online: indicates Internet data transmission status.
2.4 GHz: indicates the status of the 2.4 GHz wireless LAN.
Tel 2: indicates the status of telephone line 2.
Battery: indicates the battery status.
Troubleshooting
Glossary
18