Starting - CanyCom CM1802 Operator's Manual

6
Close
Open
Cutting height
adjust lever
Operation

6.2 Starting

1. Open fuel cock.
2. Make sure brake pedal is locked.
Parking brake lock
lever
Brake pedal
3. Make sure rotary clutch lever is in [OFF] position.
Rotary clutch
lever
4. Make sure cutting height adjust lever is in [TRAVEL] posi-
Do not overfill HST oil. HST oil expands due to
heat when in use, and may overflow.
To avoid poisoning from exhaust gas, make
sure the place is well ventilated when starting
engine.
(If not locked, depress brake pedal and apply parking brake
lock lever.)
tion.
When rotary clutch lever is in [ON] position,
safety switch is engaged and engine will not
start.
– 16 –
N O T E
DANGER
N O T E