Replacing; Oil Filter Cartridge; Hoses; Cutting Blades - CanyCom CM1802 Operator's Manual

Oil filter
Oil drain plug
Stick-like Object
Blade Tool (Optional)
5324M-0709-010E
Maintenance

7.9 Replacing

7.9.1
Replace oil filter cartridge every 100 hours of operation.
1. Before installing new filter, apply new oil on filter gasket.
2. Follow instructions in operator's manual for the engine to
3. Remove oil gauge and fill new oil of specified grade.
4. Check oil level.
5. Start engine and check for leaks.
7.9.2
Rubber products, such as fuel hose, engine oil drain hose,
and HST oil tank hose deteriorate even if they are not used.
Replace them and their cramps with new ones every three
years.
(Replace them when damaged.)
7.9.3
When handling cutting blade, wear thick gloves
or wrap blade with cloth. Handle blades careful-
ly in order to prevent injuries.
Cutting
blade shield
1. Open right hand side of cutting blade shield.
2. Hold blade with a strong stick-like object (such as screw
– 45 –

Oil Filter Cartridge

install new filter.

Hoses

Cutting Blades

CAUTION
driver) or optional blade tool.
7