Parking; Transporting In Case Of Emergency - CanyCom CM1802 Operator's Manual

6
Close
Open
Cutting height
adjust lever
Operation
7. Close fuel cock.

6.5 Parking

1. Stop machine as described in Stopping.
Rotary clutch
lever
2. Turn off engine and remove key.
3. Move cutting rotary clutch lever to [OFF] position.
4. Move cutting height adjust lever to [Transport] position.

6.6 Transporting in Case of Emergency

1. Move drive lever and auxiliary transmission shift lever to
Parking brake
lock lever
2. Move cutting helght adjust lever to [Transport] position.
3. Release parking brake lock lever and move machine.
Even when rotary clutch lever is in [OFF] posi-
tion, cutting rotary (blade) may still be turning
due to iner tia. Do not get off machine until
rotary is completely stopped.
If machine does not operate with normal control
due to engine failure, etc., do not force it to
move. Transport machine with the following pro-
cedure.
[Neutral] position.
– 22 –
WARNING
N O T E