CanyCom CM1802 Operator's Manual page 35

Item
• Check body panels and covers for
crack, deformation, and loose or
Body Panels
missing fasteners.
• Check cutting blades for cracks or
damage.
• Check blade mounting carriage
bolts for cracks or damage.
• Check cutting blade shield for
cracks or damage.
• Check skirt on cutting blade shield.
Cutting System
• Check belt tension.
• Check belt for damage or wear.
• Move rotary clutch lever to engage
rotary brake.
• Check greasing points.
• Operate head lamp switch to check
if it works.
Head Lamp
• Check head lamp for damage or
water.
Maintenance
Content
There shall not be cracks,
deformation, loose or
missing fasteners.
Blades shall be free of
cracks or damage.
Carriage bolts shall be
free of cracks, damage or
excessive wear.
Shield shall be free of
cracks or damage.
skirt shall be free of
cracks or damage, and
shall not be missing.
Shall be properly adjust-
ed.
Shall be free of damage
or excessive wear.
Rotary shall stop imme-
diately.
Greasing points shall be
sufficiently greased.
Head lamp shall light up.
Head lamp shall be free
of damage and there shall
not be water in it.
– 29 –
Timing
Remarks
√ √
Inspecting/Changing:
√ √ √
Page 46
Inspecting/Changing:
√ √ √ Page 46
√ √ √
√ √ √
Adjusting:
√ √ √
Adjusting:
√ √ √
Adjusting:
√ √ √
Greasing: Page 36
√ √
√ √ √
√ √
7
Page 43
Page 43
Page 43