CanyCom CM1802 Operator's Manual page 24

6
Main switch
Low
speed
Throttle lever
Operation
10. Remove main switch cap and put engine key into main
OFF
ON
START
11. Turn main switch to [START] position.
12. When engine starts, release main switch; it automatically
Brake pedal
13. Engage parking brake lock lever and push brake pedal into
Parking brake
lock lever
Brake pedal
14. Move throttle lever to [Low speed] position.
switch.
goes back to [ON] position.
• Do not run starter motor for an extended
period. If engine does not start after 15 sec-
onds, wait for 1 minute and try again.
• Avoid turning starter motor repeatedly when
engine is hard to star t. It may damage
starter gear.
• When an operator does not sit on seat, safe-
ty switch engages and engine will not start.
Never turn main switch to [START] position
while engine is running. It will damage starter.
the fully depressed position.
– 18 –
N O T E
CAUTION