Blind Transfer - ESI Feature Phone User Manual

User's Guide
Supervised transfer — announcing the caller to the called person
1. While connected to an outside call, press a station key (or press TRANSFER and then dial the
extension number) and wait until the called person answers.
2. Announce the caller (e. g., "Hello; I've got Bill on the line and I'm transferring him to you now.")
3. Hang up.
Note: If the transferred-to person doesn't answer in step 1, press the station key again or press FLASH
. . . to another phone number (trunk-to-trunk transfer)
Important:
USE OF FEATURES
WILL INCREASE THE RISK OF TOLL FRAUD
DIRECT
FRAUDULENT TOLL CHARGES
OR DAMAGES RELATED THERETO

Blind transfer

1. While connected to an outside call, press TRANSFER and then the line access code (9, 8, or 71–76),
and then the telephone number to which you want to transfer.
2. Hang up. Now both outside lines are connected via a trunk-to-trunk connection.
Note: If, at any point during the trunk-to-trunk transfer, you wish to return to the original call (e.g.,
Supervised transfer — announcing the caller to the called person
1. While connected to an outside call, press TRANSFER and then the line access code (9, 8, or 71–76);
then dial the phone number to which you want to transfer, and wait until the called person answers.
2. Announce the caller (e. g., "Hello; I've got Bill on the line and I'm transferring him to you now.")
3. Hang up. Now both outside lines are connected via a trunk-to-trunk connection.
Note: If, at any point during the trunk-to-trunk transfer, you wish to return to the original call (e.g.,
to be reconnected to the original caller.
, -
SUCH AS TRUNK TO
, ,
INDIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER INCLUDING
,
LOSS OF BUSINESS PROFITS
,
ARISING FROM THE USE OF THESE FEATURES
perhaps you received a busy signal at the remote end, or the recipient simply won't take the call),
just press FLASH. This disconnects the second outside connection, returning you to (and removing
from hold) the original call.
perhaps you received a busy signal at the remote end, or the recipient simply won't take the call),
just press FLASH. This disconnects the second outside connection, returning you to (and
removing from hold) the original call.
- ,
TRUNK TRANSFER THAT REQUIRE TRUNK
.
IN NO EVENT SHALL ESTECH SYSTEMS
,
BUSINESS INTERRUPTIONS
E.7
ESI Feature Phone operation
- -
TO TRUNK CONNECTIONS
, .
INC BE LIABLE FOR ANY
,
BUT NOT LIMITED TO
,
OR ANY OTHER COSTS
.
,