Select Personal Greeting; Programmable Feature Keys - ESI Feature Phone User Manual

User's Guide

1 Select personal greeting

Select the desired greeting — 1, 2 or 3. The system will play the current greeting, followed by prompts to re-
record, delete or hear again — or select the current greeting by pressing #.
1 Record personal greeting
Begin recording at the tone. Press 1 to stop. The new personal greeting automatically replaces the
previous greeting.
2 Delete personal greeting
When prompted, press 2 again to confirm deletion.
Warning: Your mailbox is disabled if no personal greeting exists. Never delete all of your existing personal
greetings before you record at least one new one.
3 Hear current personal greeting

2 Programmable feature keys

There are two methods for performing programming of your phone's programmable feature keys:
•
Direct programming — Select the key you want to program, and hold it down for at least two seconds.
This not only initiates programming but also lets you immediately program that specific key.
•
Traditional programming — Press PROGRAM. The Verbal Help Guide will speak to you, walking you
through the full menu, during which you can choose the appropriate option.
Direct programming example:
You wish to set one of the keys to dial a co-worker, whose extension is 105. Hold down the key for at
least two seconds. This automatically puts you in feature key programming. Follow the prompts to enter
1 0 5. (This has allowed you to skip two steps — pressing PROGRAM and selecting a menu option —
that you'd have had to perform if using traditional programming.)
(Continued)
User programming: An introduction
C.2