Camping On A Busy Extension - 3Com VCX Manual

Camping on a Busy
Extension
conference that the originator initiated. In the example above, if P1 the
originator of conference 1 drops All, only P1, P2, P4, P5 and P6 are
dropped. P3 is not dropped because it is the originator of conference 2
and remains connected to conference 2.
To drop conference recipients, follow these steps:
1 While on a conference, the conference originator presses the Drop soft
(right) button. The Conference Drop window displays in the Display
Panel.
2 Scroll to the drop action you want to take, either (1) Last or (2) All, and
press the appropriate number on the keypad. The party (Last) or the
conference (All) is dropped.
Alternately, you can drop recipients from a conference using the
following feature codes:
To drop the last party in a conference, enter Feature + 431.
■
To drop all parties in a conference, enter Feature + 435.
■
If the originator drops the last party in a 3-party conference, the call then
becomes a 2-party non-conference call.
The Camp On feature allows you a call to a busy or an unanswered
internal telephone, and then be automatically called back when the
destination telephone becomes available. When you activate camp on,
the system monitors the called telephone. When the extension can
receive a call, the system automatically dials your telephone (using a
priority ring or other audible ring tone that is different than your
programmed ring tone) and redials the original called extension.
You can camp on system extensions. You cannot camp on external
telephone numbers, hunt groups, pickup groups, or paging groups. If the
called extension does not become free within a time period specified by
your administrator, Camp On expires.
You can invoke the Camp On feature:
While the called extension is ringing
■
If the call does not ring on another line or go to call coverage and you
■
hear a busy tone

Camping on a Busy Extension

57