Answering A Call; Answering A Second Call; Making Calls; Making Internal Calls - 3Com VCX Manual

30 C 4: B
HAPTER ASIC

Answering a Call

Answering a
Second Call

Making Calls

Making Internal Calls

T O
ELEPHONE PERATION
To answer an incoming call, lift the handset.
Alternatively, if you are using a 3Com® 3101SP Basic Telephone, you can
press the speaker button.
If your telephone includes multiple access lines, press the Access button
for the line on which the new call is arriving (the light next to the button
will be flashing).
Unanswered calls are sent to either your call coverage point which, by
default, is your voice mailbox or your configured call forwarding
destination. See
On 3Com 3101 and 3101SP Basic Telephones, when a new call arrives
while you are on a call:
1 Press the hold button to put the current call on hold.
2 Press the Access button for the line whose status light is blinking,
indicating a new call.
3 To return to the earlier call, hang up the new call, or put it on hold, or
transfer it, and then press the Access button for the original call.
This section describes standard dialing features.
The VCX administrator can configure calling restrictions for some, one, or
all the telephones at a site. These restrictions may limit the outbound calls
(external or to another company site) a telephone can make. Ask your
administrator if any calling restrictions have been implemented on your
telephone system.
To dial an internal call:
1 Pick up the handset. On 3101SP Basic Telephones, you can press the
button. You hear the dial tone.
2 Dial the extension. Alternatively, you can use the Display Panel to find and
dial the name of the person whom you want to call in the user directory,
call logs, or a speed dial list.
3 When you complete the call, hang up the handset. If you pressed the
button, press it again to end the call.
Configuring a Call Coverage Point or Call Forwarding.