CyberData 011307 Operation Manual page 63

Singlewire-enabled voip indoor intercom with keypad
Hide thumbs Also See for 011307:
Table of Contents

Advertisement

2. On the Audiofiles page, enter values for the parameters indicated in
Note
Web Page Item
Available Space
0-9
Dot
Audiotest
Page tone
Your IP Address is
Rebooting
Restoring default
Ringback Tone
Ring Tone
Intrusion Sensor Triggered Corresponds to the message "Intrusion Sensor Triggered" (24
Door Ajar
Night Ring
Operations Guide
The question mark icon (
after the Toggle Help button is pressed
Table 2-19. Audiofiles Configuration Parameters
Description
Shows the space available for the user to save custom audio files if
they want to change the message when the door or sensor is
triggered.
The name of the audio configuration option is the same as the
spoken audio that plays on the board (24 character limit).
'0' corresponds to the spoken word "zero."
'1' corresponds to the spoken word "one."
'2' corresponds to the spoken word "two."
'3' corresponds to the spoken word "three."
'4' corresponds to the spoken word "four."
'5' corresponds to the spoken word "five."
'6' corresponds to the spoken word "six."
'7' corresponds to the spoken word "seven."
'8' corresponds to the spoken word "eight."
'9' corresponds to the spoken word "nine."
Corresponds to the spoken word "dot." (24 character limit)
Corresponds to the message "This is the CyberData IP speaker
test message..." (24 character limit)
Corresponds to a simple tone used for beep on initialization and
beep on page (24 character limit).
Corresponds to the message "Your IP address is..." (24 character
limit).
Corresponds to the spoken word "Rebooting" (24 character limit).
Corresponds to the message "Restoring default" (24 character
limit).
This is the ringback tone that plays when calling a remote
extension 
(24 character limit).
This is the tone that plays when set to ring when receiving a call 
(24 character limit).
character limit).
Corresponds to the message "Door Ajar" (24 character limit).
Specifies the ringtone for nightring. By default this parameter uses
the same audio file that is selected for the Ring Tone parameter.
Click on the Browse button to navigate to and select an audio file.
930935B
Installing the VoIP Indoor Intercom with Keypad
) in the following table shows which web page items will be defined
.
Intercom Setup
Table
2-19.
CyberData Corporation
55

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 011307 and is the answer not in the manual?

This manual is also suitable for:

011214

Table of Contents