JRC JHS-32B Instruction Manual page 92

Select an item using
and press
The window closes and WORK CH is highlighted.
TIP
TELECOMMAND2 is fixed as NO INFORMA-
TION and cannot be edited.
Select a work channel and press
ENTER
• Example: To select CH 10 for WORK CH
• After selecting a channel, CALL CH is high-
lighted and the default, CH70, is displayed.
TIP
• The WORK CH can be set to any of the
following: CH01 – CH28, CH60 – CH88 except
CH16, CH70, CH75, and CH76.
• When making a G3E SIMP TEL call, selecting
an improper channel for simplex communication
results in an error. An error message appears,
an alarm sounds, and the display prompts work
channel entry again.
• For further information on simplex/duplex mode
and channel matching, refer to 8.2 Channel
Assignment Tables.
With simplex channels, the transmission
frequency and receiving frequency are the
same.
However, with duplex channels, each frequency
is different.
• The CALL CH can be set to a channel other
than CH70 (such as CH01 – CH28, CH60 –
CH88, except for CH75 and 76). However,
doing so is not advisable because DSC
watchkeeping is maintained only for CH70.
• The default setting of WORK CH is NONE.
• END OF SEQUENCE is fixed as ACK RQ and
cannot be edited.
• If a call channel other than CH70 is selected,
press
Press
• The INDIVIDUAL CALL Display appears and
the message is transmitted.
• When the message has been transmitted,
TRANSMITTED appears.
84
4.3 Communicating in DSC (Digital Selective Call) Mode
.
ENTER
.
Enter .
1 0
to confirm the selection.
ENTER
CALL .
/
--INDIVIDUAL CALL EDIT--
FORMAT
ADDRESS
CATEGORY
TELECOMMAND1
TELECOMMAND2
WORK CH
END OF SEQUENCE:ACK RQ
CALL CH
SELECT WITH
PRESS ENTER .
PRESS STOP
--INDIVIDUAL CALL EDIT--
FORMAT
ADDRESS
CATEGORY
TELECOMMAND1
TELECOMMAND2
WORK CH
END OF SEQUENCE:ACK RQ
CALL CH
SELECT WITH
PRESS ENTER .
PRESS STOP
--INDIVIDUAL CALL--
FORMAT
ADDRESS
CATEGORY
TELECOMMAND1
TELECOMMAND2
WORK CH
END OF SEQUENCE:ACK RQ
CALL CH
TRANSMITTED
SELECT
PRESS CALL
PRESS STOP
CH70 25W
:INDIVIDUAL
:483192657
:ROUTINE
:G3E SIMP TEL
:NO INFORMATION
:NONE
:70
, INPUT NO., &
PRESS CALL TO SEND.
TO RETURN.
CH70 25W
:INDIVIDUAL
:483192657
:ROUTINE
:G3E SIMP TEL
:NO INFORMATION
:10
:70
, INPUT NO., &
PRESS CALL TO SEND.
TO RETURN.
CH70 25W
:INDIVIDUAL
:483192657
:ROUTINE
:G3E SIMP TEL
:NO INFORMATION
:10
:70
TO EDIT.
TO SEND.
TO RETURN.