JRC JHS-32B Instruction Manual Page 93

Marine vhf radiotelephone.
Hide thumbs
TIP
• If the message is not acknowledged, the display
remains.
• If the message is not acknowledged, press
again to transmit the message.
CALL
• Press
to end the transmisson.
STOP
When the message is acknowl-
edged, an alarm sounds.
• The CH70 display changes to the work
channel display.
• Press
to stop the alarm.
STOP
The work channel display appears
10 seconds after the message is
acknowledged.
The INDIVIDUAL CALL Display disappears and
the work channel Status Display appears.
TIP
When the handset is picked up before the work
channel Status Display appears, the display
appears immediately.
Start the transmission.
Press PTT to transmit.
Hang up the handset to terminate
communication.
The CH16 Status Display returns and OFF
appears for OPE in the display.
TIP
When no remote controllers are connected,
MASTER remains for OPE.
--INDIVIDUAL CALL--
FORMAT
:INDIVIDUAL
ADDRESS
:483192657
CATEGORY
:ROUTINE
TELECOMMAND1
:G3E SIMP TEL
TELECOMMAND2
:NO INFORMATION
WORK CH
:10
END OF SEQUENCE:ACK RQ
CALL CH
:70
TRANSMITTED
PRESS
STOP
TO RETURN.
10
CH
ITU
MODE: SIMP TEL
OUTPUT: 25W
OPE : MASTER
ALARM : ENABLE
SCAN: OFF
SQL
SP
: ON
POWER : AC
21
JUL
1994
14:59
S: 12°34'
W: 123°45'
JHS-32B
MARINE VHF RADIOTELEPHONE
JHS-32B
MARINE VHF RADIOTELEPHONE
4.3 Communicating in DSC (Digital Selective Call) Mode
CH10
25W
1
2
3
4
: CLOSE
5
UTC
U
6
7
8
9
10
85

Advertising

Comments to this Manuals

Symbols: 0
Latest comments: