Main Displays - JRC JHS-32B Instruction Manual

2.2
This section describes the channel status display, DSC menu display, DSC set up display
and window set up display.
G Status Display
q Channel currently selected.
w The selected transmitting power and trans-
mitting mode.
25W
1W
25WTX : Transmitting mode with 25W
1WTX
e Indicates whether the audible alarm is on or
off for normal calls (those not of category
distress or urgency) in DSC mode.
ENABLE : Alarm sounds.
DISABLE: Alarm does not sound.
r Indicates whether squelch is open or closed.
OPEN
CLOSE : Squelch is closed, and recep-
t Indicates the power source type.
AC : AC power
DC : DC power
38

2.2 Main Displays

Main Displays
!6
DUAL WATCH CH16 &
!5
USA
!4
MODE: SIMP TEL
!3
OPE : MASTER
!2
SCAN: OFF
!1
SP : ON
!0
UNACCEPTABLE.
o
21 JUL
i
S: 12°34'
OFF
: 25W is selected.
: 1W is selected.
power.
: Transmitting mode with 1W
power.
: Squelch is open for reception.
tion disabled.
q
88
CH A
OUTPUT: 25W TX
ALARM : ENABLE
SQL : CLOSE
POWER : AC
1994 14:59 UTC
W: 123°45'
MAX
y Indicates whether key click sound is on or
off. Pressing
time switches the sound on or off. The key
click sound is on when the symbol is lit, and
off when it is not lit.
u This graphic bar is displayed for a specific
period of time when
backlighting intensity of the LCD and keys
using
i The present position, displayed when a
navigation aid such as GPS is connected.
o The present date and time in UTC time.
!0 An error message. Refer to "5.1.3 Error
Message List."
!1 Indicates whether the speaker is on or off.
ON : Speaker is on.
OFF : Speaker is off.
w
e
r
t
y
U
u
and at the same
SP
is pressed. Adjust
DIM
/ or / .