JRC JHS-32B Instruction Manual page 4

１．Usual display ：
When connecting with GPS, date, UTC , latitude,
and longitude data from GPS is displayed.
２．In case of no position / UTC data：( unusual )
・ The visible alarm blinks for indicating no
position / UTC data information. The audible
alarm also sound simultaneously .
･ Check the GPS or check the connection
between GPS and VHF radiotelephone.
･ Or press ENTER key then input correct
position and UTC data manually .
Press
３． ENTER
・
「 INPUT POSITION/UTC DATA 」
screen is displayed and it will be in a
position input state.
Press
４． /
The window for selecting a coordinates
・
is displayed.
･The combination of latitude / longitude is
chosen by
▼ ▲
key.
key.
key.
ITU
MODE: SIMP TEL
OPE : MASTER
SCAN: OFF
SP : ON
01 JAN 2000
S: 12゜34゛
ITU
MODE: SIMP TEL
OPE : MASTER
SCAN: OFF
SP : ON
CAUTION : NO POSITION / UTC DATA
PRESS
- - INPUT POSITION/UTC DATA - -
POSITION : S12.34 W123.45
UTC
DATE
SELECT WITH ▼ ▲
PRESS ENTER ．PRESS CLR TO RETURN．
PRESS STOP
- - INPUT POSITION/UTC DATA - -
POSITION : N
UTC
DATE
SELECT WITH ▼ ▲
PRESS CLR TO CANCEL．
- ii -
16
C H
OUTPUT: 25W
ALARM : ENABLE
SQL : CLOSE
POWER : AC
23:59 UTC
W: 123゜45゛ ♪
16
C H
OUTPUT: 25W
ALARM : ENABLE
SQL : CLOSE
POWER : AC
ENTER TO INPUT DATA
: 23:59 (HH:MM)
: 31.12.99 (DD.MM.YY)
, INPUT NO., &
TO SET & RETURN．
: E :
: N : W :
: S : E :
S : W :
,& PRESS ENTER．
♪