G Loading Printer Paper
Cut the paper so that its leading
edge is straight (at right angles to
the edges).
Cut carefully. If the paper is creased or uneven, it
may jam.
Turn the power OFF, and open the
paper cover by pressing the knob.
Knob
Paper Cover
Switch
POWER
Remove the center shaft from its
holder and insert it through the
center of the paper roll as shown.
Holder
Center Shaft
Turn the power ON, insert the end
FEED
Switch
of the paper through the paper
slot, then press
to feed the
FEED
paper through the printer.
Paper Slot
136
9.3 NKG-52 Printer