Replacing Second Hard Disk In 3 ½ Inch Drive Cage - Fujitsu ESPRIMO E5635 Operating Manual

Hide thumbs Also See for ESPRIMO E5635:
Table of Contents

Advertisement

Replacing second hard disk in 3 ½ inch drive cage
Open the casing (see "Opening the casing").
Remove the cross-piece (see "Removing the cross-piece").
Fold up the drive cage (see "Folding up the drive cage").
Removing second hard disk
1
Installing second hard disk
1
If necessary, mount the plastic drive cover (see "Installing plastic drive cover").
Replace the cross piece (see "Installing the cross-piece").
Close the casing (see "Closing the casing").
i
It may be necessary to modify the entry for the drive in the BIOS Setup.
A26361-K691-Z220-1-7619, edition 2
Remove the screw (1).
Disconnect the cables from the hard
disk.
Remove the drive the direction of the
1
arrow out of the casing.
Slide the drive into the casing in the
direction of the arrow.
Secure the hard disk with the
screws (1).
1
Connect the cables.
Fold down the drive cage (see "Folding
down the drive cage").
System expansions
67

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Esprimo e7935Esprimo e5730

Table of Contents