Installing And Removing The Hard Disk Drive - Fujitsu Esprimo C series Operating Manual

Installing and removing the hard disk drive

Removing the hard disk drive
► Open the casing (see
3
3
2
2
1
A26361-K1002-Z220-1-7619, edition 2
"Opening the casing", Page
1
1
29).
► Fold up the drive cage (1).
► If there is a drive in the drive cage,
disconnect the data and power supply
cables from the drive.
► Fold up the hard disk cage (2).
► Pull the data and power supply cable
off the hard disk (3).
► Press the two ends of the EasyChange
rails together (1) and pull out the
hard disk drive (2).
System expansions
37