Fujitsu ESPRIMO E5635 Operating Manual page 57

For cooling, protection against fire, and in order to comply with EMC (electromagnetic
!
compatibility) regulations, you must refit the slot cover.
If you have installed or removed a PCI board, check the relevant PCI slot settings in the
i
BIOS Setup. If necessary, change the settings. Further information is provided in the PCI
board documentation.
The upper slot is suitable for low-profile cards with an adapter.
A26361-K691-Z220-1-7619, edition 2
► Push the slot cover into the slot in the
direction of the arrow. Ensure that the
point of the slot cover engages on the
outside of the board bracket.
► Fold up the retaining bracket so that it
engages.
System expansions
49