System expansions
Removing SmartCard reader and/or WLAN module
►
Open the casing (see "Opening the casing").
►
Remove the cross-piece (see "Removing the cross-piece").
►
Fold up the drive cage (see "Folding up the drive cage").
1
►
Remove the screws (1).
►
Disconnect the cables.
►
Fold down the drive cage (see "Folding down the drive cage").
►
Pull the holder out of the casing in direction of the arrow.
►
Replace the cross piece (see "Installing the cross-piece").
If you remove the SmartCard reader and/or the WLAN module without replacing it with a
!
floppy drive, you must reinstall the bay cover for reasons of cooling and fire protection and
to comply with the prevailing EMC (electromagnetic compatibility) regulations.
►
Mount the cover in the casing top cover if necessary (see "Installing plastic drive cover").
►
Close the casing (see "Closing the casing").
More detailed information on the use of Wireless LAN can be found in the "Wireless LAN"
i
manual. This manual is provided as PDF file on the "User Documentation" or
"Drivers & Utilities" CD.
72
1
A26361-K691-Z220-1-7619, edition 2