Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Fujitsu ESPRIMO E352 Series
Summary of Contents for Fujitsu ESPRIMO E352 Series
- Page 1 System Operating Manual ESPRIMO E352x / E372x / E4xx...
- Page 2 For automatic driver updates, go to:"http://support.ts.fujitsu.com/com/support/index.html" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://ts.fujitsu.com/support/servicedesk.html") • Your sales partner • Your sales office We hope you really enjoy using your new Fujitsu system.
- Page 4 You will find more information at "http://ts.fujitsu.com/terms_of_use.html" Order No. Fujitsu Technology Solutions GmbH: A26361-K1180-Z220-1-7619, edition 4...
- Page 5 ESPRIMO E352x / E372x / E4xx Operating Manual Your ESPRIMO Important notes Ports and operating elements Getting started Operation Problem solutions and tips System expansions Technical specification Index...
- Page 6 ESPRIMO is a registered trademark of Fujitsu Technology Solutions GmbH. Windows 7, Windows Vista and Windows XP are registered trademarks of Microsoft Corporation. PS/2 is a registered trademark of International Business Machines, Inc. Pentium is a registered trademark of Intel Corporation, USA.
-
Page 7: Table Of Contents
No mouse pointer displayed on the screen ..........29 Fujitsu Technology Solutions... - Page 8 Index ................. . 54 Fujitsu Technology Solutions...
-
Page 9: Your Esprimo
Some of the manuals listed can be found in electronic form on the "Drivers & Utilities" DVD. You can access and view the required information using the Acrobat Reader program, which is also included on the DVD. You can of course also print out a copy of the manual if you prefer. Fujitsu Technology Solutions... -
Page 10: Notational Conventions
Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g: indicates terms and texts that are emphasised or highlighted, e.g.: Do This font not switch off the device Fujitsu Technology Solutions... -
Page 11: Important Notes
If the device is brought from a cold environment into the room where it will be used, condensation may occur. Before operating the device, wait until it is absolutely dry and has reached approximately the same temperature as the installation site. Fujitsu Technology Solutions... -
Page 12: Cleaning The Device
Contact the corresponding government office in the respective country for current information on possible operating restrictions. If your country is not included in the list, then please contact the corresponding supervisory authority as to whether the use of this product is permitted in your country. Fujitsu Technology Solutions... -
Page 13: Fcc Compliance Statement
• Consult the dealer or an experienced radio/TV technician for help. Fujitsu Technology Solutions GmbH is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Fujitsu Technology Solutions GmbH. -
Page 14: Ports And Operating Elements
Front 1 = USB ports 5 = ON/OFF switch 2 = Headphone port 6 = Optical drive (optional) 3 = Microphone port 7 = Insert/eject button (CD/DVD) 4 = 3 inch module bay Fujitsu Technology Solutions... -
Page 15: Rear
Ports and operating elements Rear 1 = Slot covers 3 = Alternating voltage socket (AC IN) 2 = Main switch Fujitsu Technology Solutions... -
Page 16: Getting Started
Drives and boards If you have received drives or boards with your device, please do not install them until after first-time setup. How to install drives and boards is described in the "System expansions", Page 31 chapter. Fujitsu Technology Solutions... -
Page 17: Setting Up The Device
Vertical operating position (optional) Use the optional rubber feet when you wish to use the device in the vertical operating position. The set-up direction is compulsory: The ON/OFF switch must be at the top to ensure sufficient ventilation. Fujitsu Technology Solutions... - Page 18 ► Affix the rubber feet (1) to the outside of the casing. The positions of the rubber feet must correspond to the dimensions given so that the device is stable. ► Stand the device on the rubber feet. ► Reconnect any cables which were disconnected earlier. Fujitsu Technology Solutions...
-
Page 19: Connecting The Device To The Mains Supply
Getting started Connecting the device to the mains supply Mainsadapter ► Connect the power cable to the device (1). ► Plug the power plug into a grounded mains outlet (2). Fujitsu Technology Solutions... -
Page 20: Connecting External Devices
► Switch off all affected devices. Cable, ► Remove all power plugs from the grounded mains outlets. ► Unplug all data communication cables from the appropriate sockets. ► Disconnect all of the cables from the device and from the external devices. Fujitsu Technology Solutions... -
Page 21: Ports On The Device
115 V. The values for the monitor rated current can be found in the technical data on the monitor or in the operating manual for the monitor. ► Depending on the configuration level of your device, plug the monitor power cable into the grounded mains outlet. Fujitsu Technology Solutions... -
Page 22: Connecting The Mouse
The devices connected to the serial interface require drivers. Your operating system already includes many drivers. If the required drive is missing, install it. The latest drivers are usually available on the Internet or will be supplied on a data carrier. Fujitsu Technology Solutions... -
Page 23: Connecting External Devices To The Usb Ports
Plan a reasonable amount of time for this, as this process must not be interrupted. You may need the licence number for Windows during the installation. The licence number is located on a sticker on your device. Fujitsu Technology Solutions... -
Page 24: Switching On Monitor And Device
► If anything is unclear regarding the data you are asked to input, read the online Help in your operating system. You will find more information on the system, as well as drivers, utilities and updates on the "Drivers & Utilities" DVD and on the Internet under "http://ts.fujitsu.com/support/". Fujitsu Technology Solutions... -
Page 25: Operation
► If necessary, switch the monitor off (see the operating manual for the monitor). Indicators on the device Indicators, Device The indicators are on the front of the casing. Which indicators are available on your device depends on the configuration level you have selected. Fujitsu Technology Solutions... - Page 26 Never remove a diskette or a multi-card while the indicator is lit. Drive indicator, e.g. DVD DVDindicator DVDindicator CD-ROM indicator CD-ROM drive The indicator lights up when the CD-ROM or DVD drive of the device is accessed. Never remove a DVD while the indicator is lit. Fujitsu Technology Solutions...
-
Page 27: Keyboard
The illustrated keyboard is an example and may differ from the model you use. 1 = Function keys 4 = Cursor keys 2 = On/off switch (optional) 5 = Numeric keypad (calculator keypad) 3 = Alphanumeric keypad Fujitsu Technology Solutions... -
Page 28: Important Keys And Keyboard Shortcuts
The Ctrl key is also called the "Control" or "Control key". Ctrl+Alt+Del Ctrl+Alt+Del Keys keyboardshortcuts Windows security/Task-Manager Ctrl This key combination opens the Windows Security/Task Manager window. Fujitsu Technology Solutions... -
Page 29: Settings In Bios Setup
Kensington Lock. Lead-sealing The casing can be sealed to prevent it being opened by unauthorised persons. To do this, feed the sealing chain through the holes (1) and seal the chain with the lead seal. Fujitsu Technology Solutions... -
Page 30: Problem Solutions And Tips
► For further clarification of the problem, contact the Service Desk for your country (see the Service Desk list or go to "http://ts.fujitsu.com/support/servicedesk.html"). When you do this, please have ready the ID number and serial number of your system. -
Page 31: The Device Cannot Be Switched Off With The On/Off Switch
► Switch on the monitor and the device. Monitor cable not connected ► Switch off the monitor and the device. ► Check that the monitor cable is properly connected to the device and monitor. ► Switch on the monitor and the device. Fujitsu Technology Solutions... - Page 32 ► Select Safe Mode or Safe Mode with Network. ► Go to Start – Control Panel – Appearance and Personalization – Display to enter the correct values for the connected monitor as described in the operating manual of the monitor. Fujitsu Technology Solutions...
-
Page 33: No Mouse Pointer Displayed On The Screen
When installing programs or drivers, important files may be overwritten and modified. To be able to access the original data in the event of any problems following installation, you should backup your hard disk prior to installation. Fujitsu Technology Solutions... -
Page 34: Restoring The Hard Disk Contents
"Recovery Guide" manual. Tips Topic Out of system resources ► Close unnecessary applications. ► Run the applications in a different order. Other manuals Further manuals are provided as PDF files on the "Drivers & Utilities" DVD. Fujitsu Technology Solutions... -
Page 35: System Expansions
An update of the BIOS may be required for a system expansion or hardware upgrade. Further information can be found in the BIOS help section or if necessary in the Technical Manual for the mainboard. Fujitsu Technology Solutions... -
Page 36: Information About Boards
The equipment and tools you use must be free of static charges. • Only touch or hold the boards by the edge or, if present, at the areas marked green (Touch Points). • Never touch pins or conductors on boards fitted with ESDs. Fujitsu Technology Solutions... -
Page 37: Opening The Casing
The device must not be in the energy-saving mode! ► Remove any plugged-in wires which are in the way. ► Loosen the screws (1). ► Pull the cover a small distance in the direction indicated by the arrow (2) and remove it (3). Fujitsu Technology Solutions... -
Page 38: Removing The Front Panel
System expansions Removing the front panel ► Lift the locking lugs on the front panel (1). ► Fold the front panel in the direction of the arrow (2) and remove it from the casing. Fujitsu Technology Solutions... -
Page 39: Close The Casing
Securing the front panel ► Place the front panel with the three lower hooks in the front lower guide openings on the casing. ► Fold the front panel in the direction of the arrow (1) until the catches (a) engage. Fujitsu Technology Solutions... -
Page 40: Reattaching The Cover
System expansions Reattaching the cover ► Place the cover on the casing (1) and push it into place in the direction indicated by the arrow (2). ► Fasten the screws (1). ► Connect the cables to the device. Fujitsu Technology Solutions... -
Page 41: Removing The Drive Carrier
► Slide the drive cage in the direction of the arrow (2) until the guides (a) are the same height as the corresponding openings in the casing. ► Use the plastic handle to lift the drive cage out of the casing (3). Fujitsu Technology Solutions... -
Page 42: Installing The Drive Cage
► Push the drive cage into the casing in the direction of the arrow (2). ► Connect the cables to the drive cage. ► Secure the front panel on the casing again (see "Securing the front panel", Page 35). ► Close the casing (see "Close the casing", Page 35). Fujitsu Technology Solutions... -
Page 43: Installing And Removing Drives
"Non-accessible drives" are for example hard disk drives. Removing and installing accessible drives The number of screws used to attach the drives varies according to the type of drive fitted and may not necessarily match the depiction below. Fujitsu Technology Solutions... - Page 44 ► Secure the front panel on the casing (see chapter "Securing the front panel", Page 35). ► Install the cover on the casing again (see chapter "Reattaching the cover", Page 36). It may be necessary to modify the entry for the drive in the BIOS Setup. Fujitsu Technology Solutions...
- Page 45 ► Secure the front panel on the casing (see chapter "Securing the front panel", Page 35). ► Install the cover on the casing again (see chapter "Reattaching the cover", Page 36). It may be necessary to modify the entry for the drive in the BIOS Setup. Fujitsu Technology Solutions...
- Page 46 ► Secure the front panel on the casing (see chapter "Securing the front panel", Page 35). ► Install the cover on the casing again (see chapter "Reattaching the cover", Page 36). It may be necessary to modify the entry for the drive in the BIOS Setup. Fujitsu Technology Solutions...
- Page 47 ► Secure the front panel on the casing (see chapter "Securing the front panel", Page 35). ► Install the cover on the casing again (see chapter "Reattaching the cover", Page 36). It may be necessary to modify the entry for the drive in the BIOS Setup. Fujitsu Technology Solutions...
-
Page 48: Removing A Hard Disk Drive
► Remove the drive cage (see chapter "Removing the drive carrier", Page 37). ► Disconnect the cables from the mainboard. ► Undo the screw (1). ► Take the hard disk drive cage out of the casing (2). Fujitsu Technology Solutions... - Page 49 It may be necessary to modify the entry for the drive in the BIOS Setup. If you are not planning to install a new hard disk drive, secure the screws in the threaded bores on the underside of the hard disk drive cage so that they are not lost. Fujitsu Technology Solutions...
-
Page 50: Installing A Hard Disk Drive
► Remove the drive cage (see chapter "Removing the drive carrier", Page 37). ► Take the new hard disk drive out of its packaging. ► Place the hard disk drive cage on the hard disk drive (1). ► Fasten the screws (2). Fujitsu Technology Solutions... - Page 51 ► Secure the front panel on the casing (see chapter "Securing the front panel", Page 35). ► Install the cover on the casing again (see chapter "Reattaching the cover", Page 36). It may be necessary to modify the entry for the drive in the BIOS Setup. Fujitsu Technology Solutions...
-
Page 52: Installing And Removing Heat Sinks
► Fasten the screws (2). ► Connect the fan cables to the mainboard. ► Install the cover on the casing again (see chapter "Reattaching the cover", Page 36). Fujitsu Technology Solutions... -
Page 53: Assembling And Dismantling Low-Profile Units
Removing a slot cover ► Open the casing (see "Opening the casing", Page 33). ► Undo the screw (1). ► Pull the slot cover out of the slot (2). Fujitsu Technology Solutions... -
Page 54: Installing A Board
PCI board documentation. Removing boards ► If necessary, disconnect the cables which are connected to the board. ► Loosen the screw (1). ► Pull the board out of the slot (2). ► Place the board in suitable packaging. Fujitsu Technology Solutions... -
Page 55: Reinstalling A Slot Cover
Processor, replacing ► Open the casing (see "Opening the casing", Page 33). Processor,replacing ► Upgrade the processor according to the description in the manual for the mainboard. ► Close the casing (see "Close the casing", Page 35). Fujitsu Technology Solutions... -
Page 56: Replacing The Lithium Battery
► Press the catch in the direction of the arrow (1). The battery jumps out of the holder slightly. ► Remove the battery (2). ► Push the new lithium battery of the identical type into the holder (3) and press it down until it engages. Fujitsu Technology Solutions... -
Page 57: Technical Specification
Clearance required to ensure adequate ventilation: without air vents min. 10 mm with air vents min. 200 mm The data sheet for this device provides further technical data. The data sheet can be found on our website "http://ts.fujitsu.com". Fujitsu Technology Solutions... -
Page 58: Index
Cable 16 Ctrl+Alt+Del 24 Cursor keys 23 Important notes 7 Indicators, device 21 Data protection 25 Installing, Device software 19–20 indicators 21 switching on for the first time 19 Device drivers, Interfaces 17 serial interface 18 Fujitsu Technology Solutions... - Page 59 Main memory 51 Main memory, upgrading 51 Mainboard Recycling 8 Upgrades 51 Removing Mains adapter the drive carrier 37 connecting 15 Replacing, Microphone port 17 lithium battery 52 Monitor Replacing, lithium battery 52 connecting 17 Retransportation 7–8 Fujitsu Technology Solutions...
- Page 60 19 Software, connecting keyboard 18 installing 19–20 connecting the mouse 18 System expansion 31 User Documentation DVD 8 System settings, BIOS Setup 25 System unit, see Device 8 Vertical operating position 14 Video workstation 13 Transportation 7–8 Fujitsu Technology Solutions...