Installing a drive
►
Take the new drive out of its packaging.
►
Adjust the required settings on the drive (if necessary, on already-installed drives as well).
►
Press the EasyChange rails into the provided holes.
i
It may be necessary to modify the entry for the drive in the BIOS Setup.
►
Close the casing (see "Closing the casing").
A26361-K691-Z220-1-7619, edition 2
►
Push the accessible drive into the casing
until the EasyChange rails engage.
►
Plug the data and the power supply
connectors into the drive.
Make sure the polarity is correct.
System expansions
59