Installing SmartCard reader and/or WLAN module
►
Open the casing (see "Opening the casing").
►
Remove the cover from the upper casing top cover if necessary (see "Removing plastic drive
cover").
►
Remove the cross-piece (see "Removing the cross-piece").
►
Slide the carrier into the casing in the direction of the arrow.
►
Fold up the drive cage (see "Folding up the drive cage").
►
Fasten the holder with the screws (1).
►
Fold down the drive cage (see "Folding down the drive cage").
►
Connect the cables.
►
Replace the cross piece (see "Installing the cross-piece").
►
Close the casing (see "Closing the casing").
A26361-K691-Z220-1-7619, edition 2
1
System expansions
1
71