Removing An Optional Port - Fujitsu ESPRIMO E5635 Operating Manual

System expansions

Removing an optional port

► Open the casing (see "Opening the casing").
► Disconnect the cable from the connector on the mainboard.
► Press on the locking lever in the direction of the arrow (1), unhook it and swing it up in the
direction of the arrow (2).
► Remove the port from the slot (3).
For cooling, protection against fire, and in order to comply with EMC (electromagnetic
!
compatibility) regulations, you must refit the cover plate.
► Push the rear slot cover plate into the slot (4). Ensure that the point of the cover engages on
the outside of the casing.
► Fold the lock closed in the direction of the arrow (5) and allow it to engage.
► Close the casing (see "Closing the casing").
52
2
1
3
5
4
A26361-K691-Z220-1-7619, edition 2