Operation; Switching The Device On; Switching On A Device When The Lithium Battery Is Discharged (0-Watt Devices) - Fujitsu ESPRIMO E5635 Operating Manual

Operation

Switching the device on

► If necessary, switch the monitor on (see the operating manual for the monitor).
► Press the ON/OFF switch on the front of the device.
The power-on indicator lights green and the device is started.
Switching on a device when the lithium battery is
discharged (0-Watt devices)
A 0-Watt device consumes no current when it is switched off and in the quiescent state.
Your 0-Watt device is equipped with an emergency on button (primary resume button) which can be
used if it can no longer be started, for instance because the lithium battery is discharged.
After the emergency on button (1) has been pressed for a short time, the device can be switched on
again using the ON/OFF switch at the front of the device.
► Press the emergency on button (1) to start the device.
A26361-K691-Z220-1-7619, edition 2
1
23